CloseThis

Powder Flow Heat Exchanger

Cooling: The material enters the heat exchanger from the top, filling the interior completely up to the feed hopper, ensuring the material submerges the heat transfer module. At this point, cooling water flows into the module plates from the bottom and exits through the upper section of the heat exchanger. Meanwhile, the discharge rate of the feeder at the top of the feed hopper is adjusted according to the incoming material volume, maintaining a consistent material level within the hopper.
The material in operation flows uniformly and as a whole between the heat-transfer module plates, achieving cooling by means of indirect heat exchange with the cooling water inside the heat-transfer plates.

Category:

Bulk Solid Heat Transfer Devices

Product inquiries:

400-688-9325

Equipment Advantages

Energy savings of up to 90%: Heat energy loss is low. Compared to conventional technologies, the energy-saving effect is significant, with some systems achieving up to 90%.

Low emissions : Operated in a fully sealed chamber-type container, it requires minimal auxiliary gas usage, significantly reducing environmental pressure.

Loss and degradation are virtually zero: Solid dense-phase conveying and the excellent flow conditions achieved by the pillow-shaped heat-transfer plate assembly ensure thorough, uniform heat exchange, with material loss virtually eliminated.

Small footprint , Highly scalable: Vertical installation, taking up minimal space. The structure is simple and compact; its modular design allows for easy expansion according to production capacity requirements even after installation.

Easy maintenance, low cost: The plate-type solid heat exchanger is designed with a quick-opening door, allowing users to swiftly access the equipment interior for maintenance and cleaning.

None

Green Application

Industrial Applications

Chemical Powders: Large and Small Particles of Urea, NPK Compound Fertilizer, Phosphate Fertilizer, Ammonium Sulfate, Ammonium Nitrate Sulfate, Potassium Sulfate, Potassium Nitrate

Chemical Products: Boric Acid, Calcium Chloride, Calcium Hypochlorite, Defluorinated Phosphates, Potassium Chloride, Sodium Chloride, Sodium Bisulfate, Sodium Fluoborate, Sodium Percarbonate, Tetrapotassium Pyrophosphate, Tricalcium Phosphate, Sodium Tricarbonate, Ferrous Phosphate, Calcium Ammonium Nitrate

Minerals and Catalysts: Coke, Activated Carbon, Carbon Black, Pulverized Coal, Alumina, Catalysts, Chrome Sand, Clay, Copper Powder, Limestone, Nickel Chloride, Nickel Kiln Dust, Nickel Oxide, Petroleum Coke, Phosphate Rock, Resin-Coated Sand, Quartz Sand, Foundry Sand, White Clay, Fluidized Bed Cracking Catalyst

Polymers:Polyethylene (PE), Polypropylene (PP), Nylon (PA), Polychloroprene (PC), Polyester (PET), Polyvinyl Chloride (PVC), TPU Thermoplastic polyurethane elastomer, EPR (ethylene propylene diene monomer) rubber, ABS (acrylonitrile butadiene styrene) plastic, POM (polyoxymethylene), EVOH (electrical vinyl hydride), LDPE

Sugar and food products: rice, soybeans, corn, rapeseed, grape seeds, seeds, salt, feed, starch, chicken essence, glycine, carrageenan

Resource Download

Solid Heat Exchanger

File size:

31.2MB

Release date:

2025-08-25

Download

< 1 >